Thursday, April 15, 2010

TV Installation Over Fireplace

Basic Instructions to mount over fireplace


  1. Step 1: Use concrete anchors when mounting a Plasma, LED, or LCD TV over a brick fireplace.
  2. Step 2: Secure TV to mounted support bracket.
  3. Step 3: Adjust the tilt to allow proper viewing. Use the "Tilt-Mount" feature to get just the right viewing angle.

  4. Step 4: Verify that you have a plug point nearby to avoid long exposed cables running along the walls.
  5. Step 5

    Unless you are experienced, call a qualified person to carry out this installation work properly. We recommend: Music Evolution (773) 297-1473

Initial precaution procedure: a thermometer to record the maximum temperature of the mounting wall while there is a lit fire in the fireplace. It should not exceed 90 degrees F.

10 comments:

  1. After reading above post I could say to myself that is a perfect page when talking about tv installation same as the blog post of tv installation in Austin TX.

    ReplyDelete
  2. its very summarize easily understanding post general people can fastly gain the knowledge about the installation of TV over fireplace

    ReplyDelete
  3. Antenna Installation in fire is bad experience for me. Now Antenna Service have nicely placed installation of equipment in fire place or mounted roof.

    ReplyDelete
  4. If you find for Best Universal Remote in your city, I suggest you to go for Tvmagic which gave a surety for remote by year. I always use Tvmagic remote for better & cost effective.

    ReplyDelete
  5. Well impressive! Even it's just too short if you will try to read it's content it will give you clear info pertaining on tv installation over fireplace.-tv mounting NYC-

    ReplyDelete
  6. This comment has been removed by the author.

    ReplyDelete